电商详情
当前位置: 首页> 电商详情

产品详情

Ceramic tube 60G/H ozone accessories

Ceramic tube 60G/H ozone accessories
  • 产品介绍

technical parameter

-----------------------------------------------------------------------------

Name: ceramic tube 60G/H ozone generator accessories (high voltage control power + high pressure package + ozone tube)

Model: TS-60GA

Working voltage: AC220V/50HZ, AC110V/60HZ, (choose one of them).

Power consumption: 25 ~ 600W adjustable.

Air supply: dry clean oxygen or air.

Ozone production: using more than 90% purity oxygen, the flow rate is 15 to 18L/min, ozone output is more than 60G/H

Ozone concentration: highest 100MG/L (oxygen flow rate 1L/MIN)

Working environment temperature: -10 ~ 45 C, the best working environment temperature is 10~25 C.

Working environment humidity: less than 80%RH relative humidity

External dimensions: ozone tube 550*113*120MM power supply 230*150*90mm, high voltage package: 200*110*98mm

Net weight: 11KG


Product structure specification

-------------------------------------------------------------------------------

1. The ceramic tube 60G/H ozone generator fittings are composed of ceramic ozone tube and high voltage package plus driving power supply.

2. Composition and characteristics of ceramic tube: 316L stainless steel inner electrode, aluminium alloy heat sink outer electrode, 99.8% silicon dioxide ceramic tube high purity dielectric material, polytetrafluoroethylene (PTFE) and fluorine sealant original parts combined, water-cooled inner electrode, air-cooled outer electrode, water-cooled interface is pagoda structure, which can be connected by 8MM inner diameter pipe, and 8.8% inner diameter gas nozzle. MM anti-corrosion and anti-oxidation hose is connected (fluorine hose). The main characteristics of ceramic tube generator are high dielectric constant, low thermal expansion coefficient and maximum gas pressure of 0.2 MPA. The normal life span is usually 20 thousand hours.

3. Composition and characteristics of high voltage power supply: military grade PCB circuit with frequency conversion and voltage conversion and vacuum epoxy high voltage package; main features are: IGBT driving, automatic/manual frequency bandwidth, slow start-up, (limiting surge current), power supply overvoltage protection, power converter overheating protection, output short circuit protection, circuit breaking protection, acoustooptic warning. Disturbance, moisture-proof, anti-corrosion design, and flexible to PLC (0-5V cargo 4-20mA) control or power supply voltage setting function according to customer requirements, normal service life of more than 8K hours.

4. Spare parts on high voltage power supply:

A/potentiometer: The main function is to adjust the output power of ozone power supply, thereby changing the concentration and output of ozone output, clockwise to increase, counterclockwise to reduce;

B/High Voltage Wire and High Voltage Ground Wire: High Voltage Wire is independently drawn from the high voltage package. The diameter of high voltage silica gel wire is about 5MM. It needs to be connected to the radiator of the ozone tube when installed. High Voltage Ground Wire is a yellow-green wire connected from the PCB circuit board, and it needs to be connected to the electrode (water-cooled end) of the ozone tube when installed.

C/Power Terminals: Two wiring cores and a plastic wiring plug are welded and inserted into the socket of PCB circuit board to work.

5. The power supply is driven by positive and negative voltage, starting the Non-Surge current slowly, and the frequency is not changed when the potentiometer regulates the power.


上一页
下一页