电商详情
当前位置: 首页> 电商详情

产品详情

Ceramic tube 15G/H ozone accessories

Ceramic tube 15G/H ozone accessories
  • 产品介绍

technical parameter

-----------------------------------------------------------------------------

Name: ceramic tube 15G/H ozone generator accessories (high voltage power supply + ozone tube)

Model: TS-15GAX

Working voltage: AC220V/50HZ, AC110V/60HZ, (choose one of them).

Power consumption: 10~180W adjustable.

Air supply: dry clean oxygen or air.

Ozone production: using more than 90% purity oxygen, when the flow rate is 4~5L/min, the ozone output is more than 15G/H

Ozone concentration: highest 85MG/L (oxygen flow rate 1L/MIN)

Working environment temperature: -10 ~ 45 C, the best working environment temperature is 10~25 C.

Working environment humidity: less than 80%RH relative humidity

Dimensions: ozone tube 355*68*68MM power supply 204*136*100mm.

Net weight: 2.5KG


Product structure specification

-------------------------------------------------------------------------------

1. Ceramic tube 15G/H ozone generator accessories consist of two parts: ceramic ozone tube and high voltage power supply.

2. Composition and characteristics of ceramic tube: 316L stainless steel inner electrode, aluminium alloy heat sink outer electrode, 99.8% silicon dioxide ceramic tube high purity dielectric material, polytetrafluoroethylene (PTFE) and fluorine sealant original parts combined, water-cooled inner electrode, air-cooled outer electrode, water-cooled interface is pagoda structure, which can be connected by 8MM inner diameter pipe, and 8.8% inner diameter gas nozzle. MM anti-corrosion and anti-oxidation hose is connected (fluorine hose). The main characteristics of ceramic tube generator are high dielectric constant, low thermal expansion coefficient and maximum gas pressure of 0.2 MPA. The normal life span is usually 20 thousand hours.

3. Composition and characteristics of high-voltage power supply: PCB circuit with frequency conversion and voltage conversion and vacuum epoxy high-voltage package; main features are: IGBT driving, automatic/manual frequency bandwidth, slow start-up, (limiting surge current), power supply overvoltage protection, power converter overheating protection, output short circuit, circuit breaking protection, acoustooptic warning. Circuit anti-interference, Moisture-proof, anti-corrosion design, and flexible according to customer requirements for PLC (0-5V cargo 4-20mA) control or different power supply voltage setting function, normal service life of more than 8K hours.

4. Spare parts on high voltage power supply:

A/potentiometer: The main function is to adjust the output power of ozone power supply, thereby changing the concentration and output of ozone output, clockwise to increase, counterclockwise to reduce;

B/High Voltage Wire and High Voltage Ground Wire: High Voltage Wire is independently drawn from the high voltage package. The diameter of high voltage silica gel wire is about 5MM. It needs to be connected to the radiator of the ozone tube when installed. High Voltage Ground Wire is a yellow-green wire connected from the PCB circuit board, and it needs to be connected to the electrode (water-cooled end) of the ozone tube when installed.

C/Power Terminals: Two wiring cores and a plastic wiring plug are welded and inserted into the socket of PCB circuit board to work.

5. The power supply is driven by positive and negative voltage, starting the Non-Surge current slowly, and the frequency is not changed when the potentiometer regulates the power.


上一页
下一页