Product model: SFL-6GAKFS,
Ozone tube size: 202*80*92 MM
Cooling mode: air cooling
Power size: 158*61*52mm
Working voltage: AC220V/50HZ.
We can customize AC110V/60HZ, DC12V, DC24V and so on according to customer requirements.
Output power: 80W
Output voltage: AC:4.5KV (RMS)
Working frequency: 8KHZ
Equipment installation instructions
Step 1: High voltage power supply and ozone tube are installed on the insulating board, which is fixed in the cabinet. Attention should be paid to the installation of ozone tube and high voltage power supply. The distance between ozone tube and high voltage power supply and metal cabinet shell is more than 3 cm (if the high voltage part is too close to the metal cabinet shell, it may form high voltage eddy current, which may affect the use or even damage), and ozone tube installation. Located in the convective air space on the engine case, ensure that the fan on the working machine can blow to the radiator of the ozone tube, and ensure that the external electrode of the ozone tube is air-cooled and stable.
Step 2: Installation of inlet and ozone outlet: the nozzle of ozone tube can be accessed at any end, and the material of intake tube can be connected with silica gel tube or PC hose. The outlet can be connected with antioxidant tube (tetrafluoro tube, fluorine rubber tube, etc.), requiring no air leakage, and the gas of intake of ozone tube can be accessed. Whether it is oxygen or air, we should ensure that the gas is clean and dry, the temperature should not be higher than 45 degrees, and the humidity should not be greater than 70%.
The third part: Check the line: after the high-voltage line is connected to the ozone tube, the high-voltage line should be connected as short as possible. The high-voltage line length is about 25CM when the accessories leave the factory. When installed, the high-voltage line should be cut short and connected as far as possible according to the installation position, so as to avoid the high-voltage line touching other lines or objects in the cabinet, if conditions permit. You can use a silicone tube with an inner diameter of 8MM to make it safer. Other circuits, especially the connection lines of digital display electronic devices, should not be close to the high-voltage part (high-voltage package, high-voltage wire, ozone tube), otherwise the high-voltage may interfere with its normal use function.