电商详情
当前位置: 首页> 电商详情

产品详情

Quartz tube 7G/H ozone accessories

Quartz tube 7G/H ozone accessories
  • 产品介绍

Technical parameters

-----------------------------------------------------------------------------

Name: quartz tube 7G/H ozone generator accessories (ozone high voltage power supply + ozone tube)

Model: TS-7GCKFS

Working voltage: AC220V/50HZ, AC110V/60HZ, (choose one of them).

Power consumption: 70W

Air supply: dry clean oxygen or air.

Ozone output: 92% when oxygen flow rate is 2-3L/min, ozone output is more than 7G/H

Working environment temperature: -10 ~ 45 C

Working environment humidity: less than 85%

Dimensions: ozone tube size: 225*52*53MM power supply size: 160*70*65mm

Net weight: 1.0kg


 

1542593923951077327.png

Product structure specification

-------------------------------------------------------------------------------

1. Quartz tube 7G/H ozone generator accessories consist of two parts: Quartz ozone tube and high voltage adjustable power supply.

2. Composition and characteristics of quartz tube: inner electrode 316L stainless steel, outer electrode aluminium alloy radiator, silicon dioxide quartz tube with dielectric material content over 99.7%, polytetrafluoroethylene (PTFE) and fluorine sealant original parts combined, inner and outer electrode air-cooled, air nozzle connected with anti-corrosion and anti-oxidation hose with inner diameter of 6MM (fluorine hose), quartz. The main characteristics of the tube generator are high dielectric constant, good dielectric toughness, low thermal expansion coefficient and maximum gas pressure up to 0.1 MPA. The normal life span is usually 12 thousand hours.

3. Composition and characteristics of high-voltage power supply: vacuum epoxy high-voltage package; main features are: output short circuit, circuit breaking protection, circuit anti-interference, moisture-proof, anti-corrosion design, normal service life of more than 8K hours.


Instructions for equipment use

-------------------------------------------------------------------------------

TS-7GCMK quartz tube ozone generator accessories are mainly used in 10-40G/H high concentration ozone machine, can install one or more sets of equipment, such as installing two sets is 20G/H ozone machine. Is the main core components of ozone, the gas supply of available oxygen can also be used in the air, need the ozone sterilization or purification place, usually used in water treatment, its stability and long work of superior technology and electrical parameters of the life get consistent praise in the majority of users.


Equipment installation instructions

-------------------------------------------------------------------------------

The first step: high voltage power supply and ozone tube installed in the insulation board, insulation board is fixed on the chassis, the need to pay attention to: the ozone tube and high voltage power supply from the metal chassis shell is greater than 3 cm (high pressure part if the distance is too close to the metal chassis shell, may form a high pressure swirl to affect the use or damage), ozone tube installation The position on the chassis of the convective wind space, to ensure that the timing of the fan can blow to fin tube ozone, ensure the stability of ozone pipe outer electrode cooling.

Step 2: an air inlet and an ozone outlet installation: gas nozzle tube ozone is out of gas mouth, either end can import, pipe material available silicone tube or PC tube inlet, outlet pipe (PTFE tube, antioxidant fluorine rubber) is not required to pass into the ozone gas leak. The air inlet pipe, Either oxygen or air, to ensure clean and dry gas, the temperature is not higher than 45 degrees, humidity is not greater than 70%.

Part 3: check the line: high voltage line connected to the ozone tube, the high-voltage wire is connected to the shortest distance, the factory is about 25CM high pressure parts, when installed according to the installation position as high-voltage wire cut through, avoid high voltage line in the chassis and other lines or touch objects together. If there is condition You can use a silicone tube with an inner diameter of 8MM to make it safer. Other lines, especially digital electronic devices connecting line, not near the HV (high voltage, high voltage wire, ozone tube), otherwise the high voltage may interfere with their normal function.


The connection between ozone tube and high voltage power supply is illustrated.

The power supply has a high voltage line welding with a spring, the high-voltage wire welding root spring received ozone tube electrode,

The first part of the ozone tube air into the spring, then spring into the ozone tube about the position of the center with a screwdriver



1542593923724047042.png

上一页
下一页