电商详情
当前位置: 首页> 电商详情

产品详情

Quartz tube 7G/H ozone accessories

Quartz tube 7G/H ozone accessories
  • 产品介绍

technical parameter

-----------------------------------------------------------------------------

Name: quartz tube 7G/H ozone generator accessories (ozone high voltage power supply + ozone tube)

Model: TS-7GCMK

Working voltage: AC220V/50HZ, AC110V/60HZ, (choose one of them).

Power consumption: 70W

Air supply: dry clean oxygen or air.

Ozone output: 92% when oxygen flow rate is 2~3L/min, ozone output is more than 7G/H

Working environment temperature: -10 ~ 45 C

Working environment humidity: less than 85%

Dimensions: ozone tube size: 225*52*52MM power supply size: 158*65*53mm

Net weight: 1.1kg


Product structure specification

-------------------------------------------------------------------------------

1. Quartz tube 7G/H ozone generator accessories consist of two parts: Quartz ozone tube and high voltage adjustable power supply.

2. Composition and characteristics of quartz tube: inner electrode 316L stainless steel, outer electrode aluminium alloy radiator, silicon dioxide quartz tube with dielectric material content over 99.7%, polytetrafluoroethylene (PTFE) and fluorine sealant original parts combined, inner and outer electrode air-cooled, air nozzle connected with anti-corrosion and anti-oxidation hose with inner diameter of 6MM (fluorine hose), quartz. The main characteristics of the tube generator are high dielectric constant, good dielectric toughness, low thermal expansion coefficient and maximum gas pressure up to 0.1 MPA. The normal life span is usually 12 thousand hours.

3. Composition and characteristics of high-voltage power supply: vacuum epoxy high-voltage package; main features are: output short circuit, circuit breaking protection, circuit anti-interference, moisture-proof, anti-corrosion design, normal service life of more than 8K hours.


Instructions for equipment use

-------------------------------------------------------------------------------

TS-7GCMK quartz tube ozone generator fittings are mainly used in 7-28G/H high concentration ozone machine. One or more sets of equipment can be installed, such as two sets of 14G/H ozone machine. It is the main core component of ozone machine. Oxygen or air can be used as the source of gas supply. It can be used in places where ozone is needed for sterilization or purification. It is generally used in water treatment. Its superior workmanship, stability of electrical parameters and long service life have been well received by the vast number of users.


The connection between ozone tube and high voltage power supply is illustrated.



1542593923724047042.png

Equipment installation instructions

-------------------------------------------------------------------------------

Step 1: High voltage power supply and ozone tube are installed on the insulating board, which is fixed in the cabinet. Attention should be paid to the installation of ozone tube and high voltage power supply. The distance between ozone tube and high voltage power supply and metal cabinet shell is more than 3 cm (if the high voltage part is too close to the metal cabinet shell, it may form high voltage eddy current, which may affect the use or even damage), and ozone tube installation. Located in the convective air space on the engine case, ensure that the fan on the working machine can blow to the radiator of the ozone tube, and ensure that the external electrode of the ozone tube is air-cooled and stable.

Step 2: Installation of inlet and ozone outlet: the nozzle of ozone tube can be accessed at any end, and the material of intake tube can be connected with silica gel tube or PC hose. The outlet can be connected with antioxidant tube (tetrafluoro tube, fluorine rubber tube, etc.), requiring no air leakage, and the gas of intake of ozone tube can be accessed. Whether it is oxygen or air, we should ensure that the gas is clean and dry, the temperature should not be higher than 45 degrees, and the humidity should not be greater than 70%.

The third part: Check the line: after the high-voltage line is connected to the ozone tube, the high-voltage line should be connected as short as possible. The high-voltage line length is about 25CM when the accessories leave the factory. When installed, the high-voltage line should be cut short and connected as far as possible according to the installation position, so as to avoid the high-voltage line touching other lines or objects in the cabinet, if conditions permit. You can use a silicone tube with an inner diameter of 8MM to make it safer. Other circuits, especially the connection lines of digital display electronic devices, should not be close to the high-voltage part (high-voltage package, high-voltage wire, ozone tube), otherwise the high-voltage may interfere with its normal use function.



1542593923951077327.png

上一页
下一页