电商详情
当前位置: 首页> 电商详情

产品详情

10G/H dual air cooling quartz tube ozone accessories

10G/H dual air cooling quartz tube ozone accessories
  • 产品介绍

technical parameter

-----------------------------------------------------------------------------

Name: double air cooled quartz tube 10G/H ozone generator accessories (ozone high voltage power supply + ozone tube)

Model: SFL-10GCMK

Working voltage: AC220V/50HZ or AC110V/60HZ.

Power consumption: 80W.

Air supply: dry clean oxygen or air.

Ozone output: 90% when oxygen flow rate is 3-4L/min, ozone output is more than 10G/H

Maximum ozone concentration: 120mg/L

Working environment temperature: -10 ~ 45 C, the best working environment temperature is 10~25 C.

Working environment humidity: less than 80%RH relative humidity

Dimensions: ozone tube 190*118*100MM power 178*74*68mm.

Net weight: 1.8kg


Product structure specification

-------------------------------------------------------------------------------

1. The accessories of double-air-cooled quartz tube 10G/H ozone generator are composed of quartz ozone tube and high voltage power supply.

2. Composition and characteristics of double-air-cooled quartz tube: both internal and external electrodes are fuelled with aluminium alloy radiator, both internal and external electrodes can dissipate heat, the cooling area is large and the cooling effect is excellent. The dielectric high-purity silica quartz tube is 99.8%. The PTFE and fluorine rubber sealant are combined, and the gas nozzle is made of an anti-corrosion and anti-oxidation hose with an inner diameter of 8MM. The main characteristics of quartz tube generator are high dielectric constant maturity, good dielectric toughness, low thermal expansion coefficient and maximum gas pressure of 0.2 MPA. The normal life span is usually 20 thousand hours.

3. Composition and characteristics of high-voltage power supply: vacuum epoxy high-voltage package; main features: circuit anti-interference, moisture-proof, moisture-proof and anti-corrosion design, normal service life of more than 8K hours.


Instructions for equipment use

-------------------------------------------------------------------------------

SFL-10GC quartz tube ozone generator fittings are mainly used in 10G/H high concentration ozone machine, can install one or more sets of equipment, such as installing two sets of 20G/H ozone machine. It is the main core component of ozone machine. Oxygen or air can be used as the source of gas supply. It can be used in places where ozone is needed for sterilization or purification. It is generally used in water treatment. Its superior workmanship, stability of electrical parameters and long service life have been well received by the vast number of users.


Equipment installation instructions

-------------------------------------------------------------------------------

Step 1: High voltage power supply and ozone tube are installed on the insulating board, which is fixed in the cabinet. Attention should be paid to: the distance between the ozone tube and the high voltage power supply is more than 4 cm from the metal cabinet shell (if the high voltage part is too close to the metal cabinet shell, it may form a high voltage eddy current, which may affect the use or even damage), and the installation of the ozone tube. Located in the convective air space on the engine case, ensure that the fan on the working machine can blow to the radiator of the ozone tube, and ensure that the external electrode of the ozone tube is air-cooled and stable.

The second step: the cooling fan used is 12CM in diameter and the speed is greater than 4800RPM..

Step 3: Installation of inlet and ozone outlet: the nozzle of ozone tube can be accessed at any end, and the material of intake tube can be connected with silica gel tube or PC hose, and the outlet can be connected with antioxidant tube (tetrafluoro tube, fluoro rubber tube, etc.), requiring no air leakage, and the gas of intake of ozone tube can be accessed. Whether it is oxygen or air, we should ensure that the gas is clean and dry, the temperature should not be higher than 45 degrees, and the humidity should not be greater than 65%.

Part IV: Inspection line: After connecting the high-voltage wire and the high-voltage ground wire to the ozone pipe, we should try to connect the high-voltage wire with the shortest distance. The high-voltage wire length is about 30CM when the accessories leave the factory. When installing, we should cut the high-voltage wire short according to the installation position, so as to avoid the high-voltage wire touching other lines or objects in the chassis. Start, if conditions permit, the silica gel tube with an inner diameter of 8MM can be used to cover the high-voltage wire, so as to strengthen the high-voltage protection to make it safer. Other circuits, especially the connection lines of digital display electronic devices, should not be close to the high-voltage part (high-voltage package, high-voltage wire, ozone tube), otherwise the high-voltage may interfere with its normal use function.


Install connection icon:


 

1542593923951077327.png

上一页
下一页